DFT description of the magnetic properties and electron localization in dinuclear di-mu-oxo-bridged manganese complexes

Density functional theory (DFT) was applied to describe the magnetic and electron-transfer properties of dinuclear systems containing the [MnO2Mn]n+ core, with n=0,1,2,3,4. The calculation of the potential energy surfaces (PESs) of the mixed-valence species (n=1,3) allowed the classification of these systems according to the extent of valence localization as Class II compounds, in the Robin-Day classification scheme. The fundamental frequencies corresponding to the asymmetric breathing vibration were also computed.     

Electron capture ionization of explosives with a microflow rate particle beam interface

A method for the analysis of four widely used explosives based on reversed-phase liquid chromatography coupled to a quadrupole mass spectrometer is presented. A microflow rate particle beam interface was employed that offers simplified operation procedures and improved interfacing performance. A positive role played by the reduced size of the aerosol droplets generated by the microflow rate interface is outlined in this work. Greater vaporization efficiency and negligible thermal decomposition were observed for the selected compounds in the ion source of the mass spectrometer. Electron capture ionization allowed specific and sensitive determination of the analytes. Detection limits that ranged between 60 and 200 pg and had a signal-to-noise ratio of 5:1 were obtained in selected ion monitoring mode after column elution.     

Di- and trinuclear Zn2+ complexes of calix[4]arene based ligands as catalysts of acyl and phosphoryl transfer reactions

The calix[4]arene scaffold, blocked in the cone conformation by proper alkylation of the lower rim hydroxyls, was used as a convenient molecular platform for the design of bi- and trimetallic Zn2+ catalysts. The catalytic activity of the Zn2+ complexes of calix[4]arenes decorated at the 1,2-, 1,3-, and 1,2,3-positions of the upper rim with 2,6-bis[(dimethylamino)methyl]pyridine units were investigated in the cleavage of ester 6 and of the RNA model compound HPNP. High rate enhancements, up to 4 orders of magnitude, were observed in a number of catalyst-substrate combinations. Interestingly the order of catalytic efficiency among regioisomeric dinuclear complexes in the cleavage of ester 6 is 1,2-vicinal > 1,3-distal, but it is reversed in the reaction of HPNP. The higher efficiency of trinuclear compared to dinuclear complexes provides an indication of the cooperation of three Zn2+ ions in the catalytic mechanism.     

Separation and analysis of the major constituents of cloves by micellar electrokinetic chromatography

A micellar electrokinetic chromatographic method was developed and applied for the first time to the separation and quantification of the main components of cloves, namely eugenol and beta-caryophyllene. The analytes were separated in less than ten minutes in an unmodified fused silica capillary (effective length: 40.0 cm) using a background electrolyte composed of 25 mM carbonate buffer (pH 10.0) and 60 mM sodium dodecylsulfate. Analyte concentrations were determined in clove oil and in methanolic clove extracts after simple sequential dilution with methanol and background electrolyte, and the resulting electropherograms showed no interference due to other components. Precision assays gave satisfactory results, with mean standard deviation of peak areas lower than 4.7% (lower than 1.5% for migration times). The eugenol content of a commercial clove oil was about 70% (RSD% = 3.2), while that of beta-caryophyllene was about 15% (RSD% = 4.2); in clove extracts, on the other hand, eugenol was approximately 15% (RSD% = 4.7) and beta-caryophyllene 4% (RSD% = 5.1). Accuracy was also good (mean recovery >98%).     

Characterization of dendrimer properties by capillary electrophoresis and their use as pseudostationary phases

The general properties of dendrimers and in particular their electrolytic characteristics that are relevant in electrokinetic separations, are described. In order to confirm theoretical considerations on commercial dendrimer charge and hydrodynamic radius, several capillary zone electrophoresis (CZE) experiments were performed. Electrophoretic mobilities measured at different pH values indicated a sensible increase of dendrimer hydrodynamic radius at pH values lower than 2.5. This was probably due to the Coulombic repulsion of charged amine groups of the inner dendrimer shells. The principal reasons that should address the use of dendrimers as pseudostationary phases in micellar electrokinetic chromatography (MEKC) are discussed. Moreover, a survey of different separations performed utilizing dendrimers in MEKC as well as of several future plausible uses of various classes of dendrimers is presented.     

Synthesis of macrocycles via cobalt-mediated [2 + 2 + 2] cycloadditions

We investigated the formation of macrocycles from alpha,omega-diynes in cobalt-mediated co-cyclotrimerization reactions. Long-chain alpha,omega-diynes underwent metal-mediated [2 + 2 + 2] cycloadditions with nitriles, cyanamides, or isocyanates in the presence of CpCo(CO)2 (Cp = cyclopentadienide) to yield pyridine-containing macrocycles, i.e., meta- and para-pyridinophanes, such as 5m/5p, 35m/35p, and 41m/41p. The regioselectivity of these reactions was affected by the length and type of linker unit between the alkyne groups, as well as by certain stereoelectronic factors. An analogous alpha,omega-cyano-alkyne, 28, combined with an alkyne to yield two isomeric meta-pyridinophanes, such as 5m and 29m, and an ortho cycloadduct (benzannulation product), such as 29o. We developed a reaction protocol for these cobalt-based [2 + 2 + 2] cycloadditions that involves markedly improved conditions such that this process offers a convenient, flexible synthetic approach to macrocyclic pyridine-containing compounds. For example, diyne 6 reacted with p-tolunitrile in 1,4-dioxane to give 7p and 7m (7:1 ratio) in 87% yield at a moderate temperature of ca. 100 degrees C in 24 h without photoirradiation or syringe-pump addition. Isocyanates were also effective reactants, as exemplified by the formation of 44p almost exclusively (44p:44m > 50:1) in 64% yield from diyne 8 and 2-phenylethylisocyanate. By using this improved protocol we were able to co-cyclotrimerize long-chain alpha,omega-diynes with alkynes in certain cases to demonstrate a successful macrocyclic variant of the Vollhardt reaction. For instance, diyne 6 reacted with dipropylacetylene to give paracyclophane 57p and benzannulene 57o (2:1 ratio) in 29% yield.     

A theoretical study of the lowest electronic states of azobenzene: the role of torsion coordinate in the cis–trans photoisomerization

In the present paper we report the results of a multiconfigurational computational study on potential-energy curves of azobenzene along the NN twisting to clarify the role of this coordinate in the decay of the S₂(*) and S₁(n*) states. We have found that there is a singlet state, S₃ at the trans geometry, on the basis of the doubly excited configuration n²*², that has a deep minimum at about 90° of twisting, where it is the lowest excited singlet state. The existence of this state provides an explanation for the short lifetime of S₂(*) and for the wavelength-dependence of azobenzene photochemistry. We have characterized the S₁(n*) state by calculating its vibrational frequencies, which are found to correspond to the recently observed transient Raman spectrum. We have also computed the potential-energy curve for the triplet T₁(n*) at the density functional theory B3LYP level, which indicates that in this state the isomerization occurs along the twisting coordinate.Acknowledgement The financial support from MIUR (project Modellistica delle proprietà spettroscopiche di sistemi molecolari complessi funds ex 60% and project Dinamiche molecolari in sistemi di interesse chimico funds ex 40%), from the University of Bologna (Funds for Selected Research Topics) is gratefully acknowledged.Contribution to the Jacopo Tomasi Honorary Issue     

A lactam-derived vinyl boronate as a stable and crystalline reagent for the synthesis of 2-substituted piperidines by Pd-catalyzed coupling reactions

A δ-valerolactam-derived vinyl triflate has been converted into the corresponding vinyl boronate by Pd-catalyzed coupling with bis(pinacolato)diboron, which results in an umpolung. This boronate efficiently couples under Pd catalysis with aryl and heteroaryl bromides to give the corresponding 2-substituted piperidines in excellent yields.     

On the reaction of Ph2PNHPPh2 with RNCS (R=Et, Ph, p-NO2C6H4): preparation of the zwitterionic ligand EtNHC(S)Ph2P==NPPh2C(S)NEt (HSNS) and the zwitterionic metalate [(SNS)Rh(CO)

The reaction of Ph(2)PNHPPh(2) (PNP) with RNCS (Et, Ph, p-NO(2)(C(6)H(4))) gives addition products resulting from the attack of the P atoms of PNP on the electrophilic carbon atom of the isothiocyanate. When PNP is reacted with EtNCS in a 1:2 molar ratio, the zwitterionic molecule EtNHC(S)PPh(2)==NP(+)Ph(2)C(S)N(-)Et (HSNS) is obtained in high yield. HSNS can be protonated (H(2)SNS(+)) or deprotonated (SNS(-)), behaving in the latter form as an S,N,S-donor pincer ligand. The reaction of HSNS with [(acac)Rh(CO)(2)] (acac=acetylacetonate) affords the zwitterionic metalate [(SNS)Rh(CO)]. Other products can be obtained depending on the R group, the PNP/RNCS ratio (1:1 or 1:2), and the reaction temperature. The proposed product of the primary attack of PNP on RNCS, Ph(2)PN==PPh(2)C(S)NHR (A), cannot be isolated. Reaction of A with another RNCS molecule leads to 1:2 addition compounds of the general formula RNHC(S)PPh(2)==NP(+)Ph(2)C(S)N(-)R (1), which can rearrange into the non-zwitterionic product RNHC(S)PPh(2)==NP(S)Ph(2) (2) by eliminating a molecule of RNC. Two molecules of A can react together, yielding 1:1 PNP/RNCS zwitterionic products of the formula RNHCH[PPh(2)==NP(S)Ph(2)]PPh(2)==NP(+)Ph(2)C(S)N(-)R (3). Compound 3 can then rearrange into RNHCH[PPh(2)==NP(S)Ph(2)](2) (4) by losing a RNC molecule. When R=Et (a), compounds 1 a, 2 a (HSNS), and 4 a have been isolated and characterized. When R=Ph (b), compounds 2 b and 4 b can be prepared in high yield. When R=p-NO(2)C(6)H(4) (c), only compound 3 c is observed and isolated in high yield. The crystal structures of HSNS, [(SNS)Rh(CO)], and of the most representative products have been determined by X-ray diffraction methods.     

Multireference perturbation CI I. Extrapolation procedures with CAS or selected zero-order spaces

We discuss the “three class” approximation to full multireference perturbation CI, which greatly reduces the computational effort by restricting the summation of diagrams to determinants belonging to a subspace of the zero-order space. In the framework of the CIPSI algorithm, we propose a new extrapolation procedure allowing recovery of the full “two class” results. The new procedure is applied to complete active spaces (CAS) and to individually selected zero-order spaces. Comparison with a full two class calculation on a CAS shows a reduction of computer time of one or two orders of magnitude in the tests presented here, with an accuracy in the order of 0.1 kcal/mol. Our procedure can thus compete with the CASPT2 algorithm, specifically conceived to deal with CAS. In the case of selected zero-order spaces, the speed-up is less dramatic but the method still retains its advantages. Received: 12 June 1997 / Accepted: 31 July 1997